Ata Style
|
|
AUDIO DYNAMICS 27 SPACE ATA GLIDE STYLE 19″ COMBO RACK* $338.90 |
|
|
Gator G-Tour Shock Rack (12-Space) (12U ATA-Style Shock Rack Case w/Casters) $639.99 |
|
|
Numark MIXDECK CASE ATA style Flight Coffin Case DJ NEW $149.99 |
|
|
Gator ATA TSA 335-Style Guitar Case $139.99 |
|
|
Gator Cases G-TOUR-TRK-3022HS ATA Tour-Style Truck-Pack Road Trunk $499.99 |
|
|
GATOR G-TOUR 2U TORU STYLE ATA FLIGHT RACK CASE NEW $189.95 |
|
|
Prosound FR1002 10 X 2 Top Load Equipment Case ATA Style Top Load Rack $124.99 |
|
|
Prosound FR1002 10 X 2 Top Load Equipment Case ATA Style Top Load Rack – New $159.99 |
|
|
ATA Hinged Safe Case™ for Orange Terror Bass 1000 Bass amp head HINGED STYLE! $184.00 |
|
|
Road Runner ATA Style Deluxe Rack fits motif es, fantom xr, korg triton rack !!! $199.99 |
|
|
ATA STYLE Medium Duty Carpet Lined CASE for YAMAHA P70 P70S KEYBOARD – New! $129.95 |
|
|
Gator Case G-TOUR 24X36 Gator Ata-Style Rolling Mixer Equipment Road Case 24″… $349.99 |
|
|
Gator Case G-TOUR 10U CAST Gator Ata Style 10-Space Rack Road Case Locking C… $349.99 |
|
|
Gator Case GRR-10L Gator Rolling Ata Style 10-Space Deluxe Polyethylene Rack $249.99 |
|
|
Gator Case G-TOUR 10X16 PU Gator Ata Style Pop-Up Console Rack Road Case With… $659.99 |
|
|
Lot of 34 SATA SERIAL ATA CONNECT CABLE Style 2725 E257034 20-02-00030-24-R $29.95 |
|
|
ATA STYLE Medium Duty Carpet Lined CASE for YAMAHA GF2412 GF 2412 GF 24/12 MIXER $129.95 |
|
|
Gator G-TOUR-PU Pop-up ATA Style Console Rack Road Case $599.99 |
|
|
Gator G-TOUR-PU Pop-up ATA Style Console Rack Road Case $659.99 |
|
|
ATA STYLE Medium Duty Carpet Lined CASE for PEAVEY DELTA BLUES 210 Amplifier $129.95 |
|
|
Lift-off Style Vox AC15VR Valve Reactor 1×12 Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Vox AC30C2 30w 2×12 Tube Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Vox AC30C2BC Black Comet 30w 2×12 Tube Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Vox AC30C2X 30w 2×12 Tube Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Vox Hand Wired AC30HW2X 30w 2×12 Tube Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Vox Custom AC15C1 15w 1×12 Tube Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Vox Valvetronix VT120 120w 2×12 Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Vox Valvetronix VT80 80w 2×12 Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Marshall 1962 Blues Breaker Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Marshall AS 100D 2×8 Acoustic Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Marshall AS 50D 2×8 Acoustic Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Marshall JMD1 Series JMD501 50w 1×12 Digital Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Marshall JVM Series JVM 410C Tube Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Marshall MA Series 50C 50w 1×12 Tube Combo Amp ATA Case $280.00 |
|
|
Chicago Case ATA Style Shipping Case $149.99 |
|
|
ATA Medium Duty Carpet Lined STYLE CASE for FENDER QUAD REVERB AMPLIFIER -New $129.95 |
|
|
ROTATING LIGHT MOVING HEAD 2 IN 1 ATA CASE – TRAY STYLE – ANY MODEL LIGHTS! $269.00 |
|
|
Gator GC-335 ATA-Style Guitar Case $99.99 |
|
|
AUDIO DYNAMICS 31 SPACE ATA GLIDE STYLE 19″ COMBO RACK $368.00 |
|
|
Lift-off Style Peavey 6505 112 60w 1×12 Tube Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Peavey 6505 212 Combo 2×12 Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Peavey Bandit 112 with Transtube Technology Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Peavey Classic 30 112 Tube Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Peavey Classic 50 212 Tube Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Peavey Delta Blues 115 Tube Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Peavey ValveKing 112 Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Peavey ValveKing 212 Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Peavey Vypr 15 15w 1×8 Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Peavey Vypr 30 30w 1×12 Combo Amp ATA Case $280.00 |
|
|
Lift-off Style Line 6 Spider III 150 75wx2 2×12 Stereo Combo Amp ATA Case $280.00 |
UID Marking: Method For Improving Item Traceability
The United States Department of Defense has laid down that UID marking has to be done on any available asset. UID marking is a unique way to mark tangible items so that a duplicate of the same item cannot be available anywhere in the world. It makes sure that only one number is attached to one item. This number is the identification of this item, which will help to trace this item, irrespective of where it rests in this world.
The technology behind UID marking is 2D Data Matrix ECC 200 symbol. This type of marking takes care of data integrity and data quality during the entire lifetime of the item. UID marking also supports multi-faceted business applications. This marking standard supports the DoD in its drive to meet enhanced goals and objectives. It enhances total asset visibility, improves lifecycle item management and accountability and provides clean financial audits.
Quality of UID marking
But it is not enough to just go for UID marking. We should make sure that the 2D Data Matrix bar code adheres to a high level of quality. It has to conform to UID standard when it is used with either direct part UID marking techniques or labels. It should also meet the standards set by ISO and SAE.
The surface does not obstruct the UID markings. These markings as well as 2D matrix bar code symbols can be made on many types of surfaces. The UID marking symbols generally can be found among UCC.EAN, ANSI MH 10.8.2 or ATA style descriptors. The Department of Defense (DoD) has become choosy about the type of items it accepts. It strictly puts down that the selected vendors should supply parts with UID Data Matrix symbols conforming to MIL-STD 130M standard.
It is certain that when each part is engraved with an UID using Data Matrix Laser etching system, they have the name of the manufacturer, serial number and part number inscribed on them. This unique identification sets each item apart and will later help to identify it, no matter who uses it or which part of the world it goes to.
Method behind UID marking
When so much care is taken to inscribe each item with an UID, we must pay importance to the fact that the material with which it is marked lasts the entire lifetime of the item. It should not come off under any circumstances. The UID bar code should remain on the item in a readable form. This is why it is imperative that the UID marking methodology is above criticism.
Many types of materials are used in different methods used in UID marking. A metal tag with a permanent adhesive is preferably used. We can also make use of durable polyester labels. Both of them are suitable for use in many different environments. Some other marking items are laser etch, dot peen, chemical etch and ink jet. All of them suit the purpose of direct part Unique Identification. UID marking can be used to make life easier for most people in the world.
About the Author
ID-integration.com provides complete solutions for UID and UID marking related needs. ID-integration.com also provides complete solutions to meet new DoD direct part marking requirements.
fmage]
ATA kid style 1